Operation Check

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Check the power door lock operation.
CAUTION: The following operation check is based on the vehicle initial state that is not customized yet.
1. Inspect the basic functions.
  1. Check that all doors are locked when the lock side of the door control switch is pressed.
  2. Check that all doors are unlocked when the unlock side of the door control switch is pressed.
  3. Check that all doors are locked when the driver's door key cylinder is turned to the lock side using a key.
  4. Check that all doors are unlocked when the driver's door key cylinder is turned to the unlock side using a key.
2. Checking lockout prevention function (with entry & start system)
  CAUTION: To prevent the electronic key from being left inside the vehicle inadvertently, perform the following checks with the driver side window opened.
  1. Place an electronic key inside the vehicle.
  2. With the driver's door opened, set the driver's door lock knob or door control switch to the lock state and close the driver's. Check that all doors are unlocked.
3. Checking lockout prevention function (without entry & start system)
  CAUTION: To prevent the key from being left inside the vehicle inadvertently, perform the following checks with the driver side window opened.
  1. Turn the ignition switch to ON or ACC.
  2. Check that all doors are unlocked immediately when door control switch (for manual operation) is operated to the lock side with the driver's door opened.
4. Checking security function of door lock control system
  1. Open the driver's door window before closing all doors so that the door control switches can be operated even from outside. (Step 1)
  2. Starting from the step 1, lock the driver's door using a key from outside. Next, check that the doors are not unlocked when the unlock side of the door control switch (for manual operation) is operated from outside.
  3. (With double locking system) Starting from the step 1, lock the drivers door by wireless key operation or entry lock operation *1 from outside. Next, check that the doors are not unlocked when the unlock side of the door control switch (for manual operation) is operated from outside.
    *1: With entry & start system
    
    NOTE: Check that the security function of the door lock control system is cancelled under the following conditions.
    - Turn the ignition switch to ON.
    - The driver's door is unlocked using an actual key.
    - After the door lock knob is unlocked manually, the unlock side of the door control switch (for manual operation) is pressed.
    - The door is unlocked by wireless operation.
    - The door is unlocked by entry operation.