LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> BRZ Series.HyperBlue >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Entry Start System Start System (Keyless Start)) >> Entry & Start System (Start Function) >> Symptom Tests >> The power does not turn ON (power status changes to IG ON but not to ACC ON) >> Circuit description

Circuit description

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

With the electrical key transmitter sub-assembly in the vehicle interior, press the engine switch. The collation ECM (smart key ECM ASSY) receives the signal and the power mode changes. If the power mode does not change to ACC ON but does change to IG ON, use these troubleshooting procedures.

NOTE: If you remove and then reconnect the battery cable, the power returns to the mode it was before you removed the cable.
scientia non olet · About LEMON Manuals