LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> BRZ Series.HyperBlue >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Entry Start System Start System (Keyless Start)) >> Entry & Start System (Start Function) >> Diagnosis System

Diagnosis System

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Description of functions
    1. Entry and start system (for start function) data and the Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the SSM3 to check for malfunctions and perform repairs.
  2. Check DLC3
    1. Check DLC3.
  3. INSPECT BATTERY VOLTAGE
    1. If the voltage is below 11V, recharge or replace the battery before proceeding.

      Standard voltage: 11 to 14 V

scientia non olet · About LEMON Manuals