Unit Inspection

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Fuel injector assembly check

CAUTION: This procedure must be used only when judging short circuit and open circuit. It cannot be used for judging defective operation.

Resistance check

Measure the resistance between the terminals.

RESISTANCE

Inspection terminals	Inspection conditions	Standard value
1 - 2	20°C {68°F}	1.9 Ω

Fig 1: Identifying Fuel Injector Assembly Connector Terminals

Courtesy of SUBARU OF AMERICA, INC.