Circuit description
If any of the following operations are performed, the collation ECM (smart key ECM assembly) receives a signal and changes the power mode.
- When the electrical key transmitter sub-assembly is in the vehicle interior, press the engine switch.
- When the transmitter battery of the electrical key transmitter sub-assembly is drained, depress the brake pedal *1 or the clutch pedal *2, and hold the electrical transmitter sub-assembly up to the engine switch.
- If the entry cancel function has been customized, while depressing the brake pedal *1 or the clutch pedal *2, hold the electrical key transmitter sub-assembly up to the engine switch.
*1: With automatic transmission
*2: Manual transmission
NOTE:
If you remove and then reconnect the battery cable, the power returns to the power mode it was before you removed the cable.
Related [Current Data Display & Save] and [System Operation Check Mode] items
SYSTEM OPERATION CHECK MODE ITEMS DESCRIPTION
| Symptoms | [Current Data Display & Save] items | [System Operation Check Mode] items |
|---|---|---|
| The power mode does not switch to on (IG) or to on (ACC). | Power supply
Engine
|
- |