Alternator (Fa20): Installation
- Installation of the alternator assembly
- Install the alternator assembly in place with the two bolts.
Standard value: T=25N.m {255kgf.cm} {18.4ft.lbf}
- Connect the connector.
- Connect the wiring harness to the B terminal with a nut.
Standard value: T=16N.m {163kgf.cm} {11.8ft.lbf}
- Install the terminal cap.
- Install the alternator assembly in place with the two bolts.
- Installation of V-belt
(Refer to INSTALLATION )
- Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4 ft.lbf}