Crankshaft Position Sensor (FA20): Installation
WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Installation of crankshaft position sensor
- Using bolt, install the crankshaft position sensor.
Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf}
- Connect the connector for crankshaft position sensor.
- Using bolt, install the crankshaft position sensor.
- Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}