Camshaft Position Sensor (FA20): Installation

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Installation of camshaft position sensor (bank 2 exhaust side)
1. Apply engine oil to new O-ring, and attach it to the camshaft timing oil control valve assembly.
2. Using bolt, install the camshaft position sensor.
  Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf}
3. Connect the connector for camshaft position sensor.
Installation of under cover front AL (Refer to COOLING SYSTEM (FA20) )
Installation of camshaft position sensor (bank 2 intake side)
1. Apply engine oil to new O-ring, and attach it to the camshaft timing oil control valve assembly.
2. Using bolt, install the camshaft position sensor.
  Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf}
3. Connect the connector for camshaft position sensor.
Installation of camshaft position sensor (bank 1 exhaust side)
1. Apply engine oil to new O-ring, and attach it to the camshaft timing oil control valve assembly.
2. Using bolt, install the camshaft position sensor.
  Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf}
3. Connect the connector for camshaft position sensor.
Installation of camshaft position sensor (bank 1 intake side)
1. Apply engine oil to new O-ring, and attach it to the camshaft timing oil control valve assembly.
2. Using bolt, install the camshaft position sensor.
  Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf}
3. Connect the connector for camshaft position sensor.
Connection of the battery ground terminal
Standard value: T=6.0Nm {61kgf.cm} {4.4ft.lbf}