On-Vehicle Inspection
WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Function inspection of accelerator pedal sensor assembly
- Connect the SSM3 to the DLC.
- Turn the ignition switch to ON.
- According to the display, select [ECU Data Monitor] →[Accelerator Sensor No1 Voltage / Accelerator Sensor No2 Voltage], and check the value when the accelerator pedal is operated.
Courtesy of SUBARU OF AMERICA, INC.
VOLTAGEPedal condition Accelerator No. 1 sensor voltage Accelerator No. 2 sensor voltage Full closed 0.5 to 0.8 V 0.5 to 0.8 V Full open 2.4 to 3.5 V 2.4 to 3.5 V Full closed →Full open →Full closed Voltage shall change continuously. Voltage shall change continuously.