LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> BRZ Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Anti-Theft System (Service Information)) >> Auto Alarm System >> Current Data Display & Save / System Operation Check Mode

Current Data Display & Save / System Operation Check Mode

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Current Data Display & Save
    NOTE: By using the SSM3 and viewing [Current Data Display & Save], you can find out about the value and status related to items such as the switch, the sensor, or the actuator without having to remove the relevant parts. Because the non-intrusive inspection allows you to read the intermittent statuses or signals without interfering with parts or lines, it is very convenient. By reading the [Current Data Display & Save] information at the initial stage of troubleshooting, you can save on time for diagnosing trouble.
    1. Connect the SSM3 to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn on the SSM3.
    4. Enter the following menu items: [Integ. unit mode] →[Current Data Display & Save].
      MAIN BODY

      Item Name Description/display range Normal value Remarks
      [Security System] Anti-theft system / OFF or ON Customization status is displayed. -
      [D Door Courtesy] Front RH door courtesy light switch signal / OFF or ON OFF: Driver's door is closed
      ON: Driver's door is open      		 -
      [D Door Lock Pos] Front RH door lock position switch signal / OFF or ON OFF: Driver's door is locked
      ON: Driver's door is unlocked      		 -
      [P Door Courtesy] Front LH door courtesy light switch signal/OFF or ON OFF: Passenger's door is closed
      ON: Passenger's door is open      		 -
      [P Door Lock Pos] Front LH door lock position switch signal / OFF or ON OFF: Passenger's door is locked
      ON: Passenger's door is unlocked      		 -
      [Luggage Courtesy SW] Trunk courtesy switch / OFF or ON OFF: Trunk is closed
      ON: The trunk is open.      		 -
      [Ignition] Engine switch condition / OFF or ON [OFF]: IG OFF
      [ON]: IG ON      		 -
      [ACC SW] Engine switch condition / OFF or ON [OFF]: IG OFF
      [ON]: ACC ON      		 -
  2. System Operation Check Mode
    NOTE: By performing the [System Operation Check Mode] using the SSM3, relay, VSV, actuator and other devices can be operated without removing parts. This non-intrusive inspection is very useful because intermittent operation is possible without disturbing any parts or wiring. Diagnostic time can be reduced by performing the [System Operation Check Mode] at an early stage of troubleshooting. The information of [Current Data Display & Save] can be displayed while performing the [System Operation Check Mode].
    1. Connect the SSM3 to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn on the SSM3.
    4. Enter the following menu items: [Integ. unit mode] →[Work Support] →[System Operation Check Mode].
    5. Based on the information displayed by the SSM3, execute [System Operation Check Mode].
      MAIN BODY

      Item Name Description/display range Normal value Remarks
      [Security Indicator] Security indicator light ON/OFF -
      [Horn Output] Vehicle horn ON/OFF -
scientia non olet · About LEMON Manuals