Combination Meter ASSY: Installation

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Installation of the combination meter ASSY
1. Connect the connector.
2. Engage two clips and install the combination meter ASSY.
3. Install the 2 screws.
Installation of the instrument panel meter ornament UPR (Refer to INSTALLATION )
Installation of the meter hood SUB-ASSY (Refer to INSTALLATION )
Installation of instrument cluster finish panel SUB-ASSY CTR (Refer to INSTALLATION )
Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}
Settings when removing/installing battery terminals (Refer to SETTING PROCEDURES AT PARTS REPLACEMENT AND REMOVAL/INSTALLATION )