Symptom Table
WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
| Symptoms | Inspection items | Reference pages |
|---|---|---|
| No clock display | Vehicle wiring harness and connector | - |
| Replace the clock ASSY | REMOVAL | |
| Can not set the time | Check if time setting is performed while vehicle is in stoppage | - |
| Replace the clock ASSY | REMOVAL | |
| Significant time error | Replace the clock ASSY | REMOVAL |
| Illumination level does not change when operating the light control rheostat | Data monitor of SSM3 (external dimming output value) | CURRENT DATA DISPLAY & SAVE / SYSTEM OPERATION CHECK MODE |
| Refer to the troubleshooting flowchart "ILLUMINATION LEVEL DOES NOT CHANGE WHEN OPERATING THE LIGHT CONTROL RHEOSTAT " | ILLUMINATION LEVEL DOES NOT CHANGE WHEN OPERATING THE LIGHT CONTROL RHEOSTAT | |
| Vehicle wiring harness and connector | - | |
| Inspect combination meter ASSY | ECM TERMINAL ARRANGEMENT | |
| Replace the clock ASSY | REMOVAL |