LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> BRZ Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Lighting System (Exterior)) >> Lighting system >> customize function

customize function

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Customize the lighting system (exterior)
    1. Customize using the SSM3
      1. Connect the SSM3 to the DLC3 and turn the ignition to IG ON.
      2. From the SSM3 display screen,[Each System Check]→[Integ. unit mode]→[Customize]→ select "Each Item" and customize the settings.
      Display name Initial setting Contents Setting Controller ECM
      [Light Auto OFF Delay] 30 s Keeps the headlights on for a certain period of time after turning the ignition switch off and closing all doors with the low beam headlights on. OFF, 30 s, 60 s or 90 s Main body ECM (multiplex network body computer)
      [Auto Light Sensitivity] ±0% Auto light control sensor sensitivity (illumination detection) adjustment function settings (The higher the set value, the easier the light turns on) -40% / -20% / ±0% / +20% / +40%
      [DRL Function] ON ON/OFF of the DRL function ON or OFF
      CAUTION: Items without settings are not displayed in the SSM3 or do not function.
scientia non olet · About LEMON Manuals