Current data display & save / System operation check mode
WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Inspection with SSM3
- Data monitor
- Use the SSM3 and data monitor to determine functionality and narrow down the defective part.
SSM3 SCREEN: [EACH SYSTEM CHECK]→ [INTEG. UNIT MODE]→ [CURRENT DATA DISPLAY & SAVE]Item Name Description/display range Normal value Remarks [Ignition] Status of the IG signal
Display range: OFF - ON[OFF]: IG OFF
[ON]: IG ON- [ACC SW] Status of the ACC signal
Display range: OFF - ONOFF: ACC OFF
[ON]: ACC ON- [Dimmer] Headlight dimmer switch (HI) status
Display range: OFF - ONOFF: the dimmer switch is OFF
ON: the dimmer switch is HI- [Passing Light SW] Headlight dimmer switch (flashing) status
Display range: OFF - ONOFF: the headlight dimmer switch (flashing) is OFF
ON: the headlight dimmer switch (flashing) is ON- [Lighting I Lamp Output] Light control switch (TAIL) status
Display range: OFF - ONOFF: the light control switch (TAIL) is OFF
ON: the light control switch (TAIL) is ON- [Lighting II Lamp Output] Light control switch (HEAD) status
Display range: OFF - ONOFF: the light control switch (HEAD) is OFF
ON: the light control switch (HEAD) is ON- [Lighting Hi Lamp Output] Headlight HI beam status
Display range: OFF - ONOFF: Normal
ON: Headlight HI beam is lit up- [Rear Fog Light SW] Rear fog light switch status
Display range: OFF - ONOFF: the rear fog light switch is OFF
ON: the rear fog light switch is ON- [Front Fog Light SW] Front fog light switch status
Display range: OFF - ONOFF: the front fog light switch is OFF
ON: the front fog light switch is ON- [R fog lamp output] Rear fog light status
Display range: OFF - ONOFF: the rear fog light is OFF
ON: the rear fog light is ON- [Front Fog Lamp] Front fog lights status
Display range: OFF - ONOFF: the front fog light is OFF
ON: the front fog light is ON- [Auto Light SW] Light control switch (AUTO) status
Display range: OFF - ONOFF: the light control switch is OFF
ON: the light control switch is AUTO- [Head Light Switch (H)] Light control switch (HEAD) status
Display range: OFF - ONOFF: the light control switch is OFF
ON: the light control switch is HEAD- [Tail Light Switch (T)] Light control switch (TAIL) status
Display range: OFF - ONOFF: the light control switch is OFF
ON: the light control switch is TAIL- [D Door Courtesy] Driver's seat door courtesy light switch status
Display range: Open - CloseOpen: the driver side door is opened
Close: the driver side door is closed- [Illumination Rate Info] Automatic light control sensor status
Display range: 0 to 65535Outputs a number according to the brightness (in units of lx) If there is no light, 0 will be displayed. [Sensitivity] Sensitivity of the automatic light control system / Light2, Light1, Normal, Dark1 or Dark2 Customize setting displayed - [DRL Function] DRL function / ON or OFF Customize setting displayed - [DRL Output] DRL output / ON or OFF ON: DRL output
OFF: Normal- [Light Auto OFF Delay] Light auto OFF delay / Off, 30 s, 60 s or 90 s Customize setting displayed - CAUTION: Items without settings are not displayed in the SSM3 or do not function. - [System Operation Check Mode]
- Use the SSM3 and the System Operation Inspection Mode to determine functionality and narrow down the defective part.
SSM3 SCREEN: [EACH SYSTEM CHECK]→ [INTEG. UNIT MODE]→ [WORK SUPPORT]→ [SYSTEM OPERATION CHECK MODE]Item Name Item description Drive [Daytime Running Light] Daytime running lights ON/OFF [Taillight Relay] Turn on the tail lights. OFF - ON [Headlight Relay] Turn on the headlight LO beams. OFF - ON [Head Light Hi] Turn on the headlight HI beams. OFF - ON [Front Fog Lamp Output] Turn on the front fog lights. OFF - ON [Rear Fog Light Relay] Turn on the rear fog light. OFF - ON *1: Perform operation confirmation when the tail lights are on. CAUTION: Items without settings are not displayed in the SSM3 or do not function.
- Data monitor