Alternator (FA20): Reassembly: Installation

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Install the alternator ASSY.
1. Install the alternator ASSY in place with the two bolts.
  Standard value: T=25N.m {255kgf.cm} {18.4ft.lbf}
2. Connect the connector.
3. Connect the wiring harness to the B terminal with a nut.
  Standard value: T=16N.m {163kgf.cm} {11.8ft.lbf}
4. Install the terminal cap.
Install the fan and alternator V-belt.
(Refer to INSTALLATION )
Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4 ft.lbf}