Unit Inspection

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Check of transmission shift switch

Resistance inspection

Measure the resistance between the terminals.

RESISTANCE

Inspection terminals	Inspection conditions	Standard value
1 - 3	Pull the shift switch lever RH (+) side.	Less than 10 Ω
1 - 3	Release the shift switch lever.	1 MΩ or more
1 - 4	Pull the shift switch lever LH (-) side.	Less than 10 Ω
1 - 4	Release the shift switch lever.	1 MΩ or more

Fig 1: Transmission Shift Switch Terminals Layout

Courtesy of SUBARU OF AMERICA, INC.