Transmission Control Computer ASSY: Installation

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Installation of transmission control computer ASSY
1. Install the transmission control computer ASSY to the transmission control computer bracket with 2 nuts.
  Standard value: T=7.5N.m {77kgf.cm} {5.5ft.lbf}
2. Install the transmission control computer ASSY with 2 nuts.
  Standard value: T=7.5N.m {77kgf.cm} {5.5ft.lbf}
3. Connect the 2 connectors to the transmission control computer ASSY.
Installation of instrument panel under cover SUB-ASSY No. 1 (refer to INSTALLATION )
Installation of instrument side panel RH (refer to INSTALLATION )
Connection of the battery ground terminal
Initialization when removing/installing battery terminals
(Refer to WORKING PRECAUTIONS AND NOTES )