Front Stabilizer Bar: Installation

1. Install the front stabilizer bar bushing No. 1 on the outer side of the vehicle than the ring section of the stabilizer bar FR.
   CAUTION: Install the front stabilizer bar bushing No. 1 with the arrow mark facing the front of the vehicle.
   Fig 1: Installing Front Stabilizer Bar Bushing No. 1

   Courtesy of SUBARU OF AMERICA, INC.

1. Using the bolt and nut, install the front stabilizer bracket No. 2 LH on the sub frame complete LH.

   Standard value: Bolt

   T=75N.m {765kgf.cm} {55.3ft.lbf}

   Nut

   T=25N.m {255kgf.cm} {18.4ft.lbf}

   Fig 2: Locating Front Stabilizer Bracket No. 2 Bolts (LH)

   Courtesy of SUBARU OF AMERICA, INC.

1. Using four new bolts, install the stabilizer bar FR with the sub frame complete (body mounting cushion SUB-assembly RR) LH.

   Standard value: T=60N.m {612kgf.cm} {44.3ft.lbf}

1. Secure the stud bolt, and install the front stabilizer link assembly LH to the stabilizer bar FR with a new nut. Standard value: T=46N.m {469kgf.cm} {33.9ft.lbf}
2. Secure the stud bolt, and install the front stabilizer link assembly LH to the front shock absorber w/ coil spring with a new nut.

   Standard value: T=46N.m {469kgf.cm} {33.9ft.lbf}

1. Install the undercover front side rear LH with the three clips.

Standard value: T=120N.m {1224kgf.cm} {88.5ft.lbf}