LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Electrical >> Gauges >> Meter/Gauge System >> Trip Switch >> Unit Inspection

Unit Inspection

  1. Trip switch inspection
    1. Measure the resistance between the terminals.

      Resistance

      RESISTANCE REFERENCE

      Inspection terminals
      (Terminal symbol)      		 Inspection conditions Standard value
      2(TRIP) - 1 Trip switch OFF →ON 10 kΩ or more →less than 1 Ω
      3(DISP) - 1 Display switch OFF →ON 10 kΩ or more →less than 1 Ω
      8(CS) - 1 Speed display setting switch OFF→ON 10 kΩ or more →less than 1 Ω
      Fig 1: Trip Switch Connector Terminal Identification
      G10216521Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals