Drive Cycle H
| DTC | Item | Condition |
|---|---|---|
| P0071 | Ambient Temperature Sensor Circuit "A" Range/Performance |
|
| P0116 | Engine Coolant Temperature Sensor 1 Circuit Range/Performance |
|
| P0451 | Evaporative Emission System Pressure Sensor/Switch Range/Performance | 60 seconds have elapsed since ignition switch is OFF. |
| *P050A | Cold Start Idle Air Control System Performance | - |
| *P050B | Cold Start Ignition Timing Performance | - |
- Perform the Clear Memory Mode. < Ref. to CLEAR MEMORY MODE .>
- With the ignition switch ON, read the value in «Coolant Temp.» and «Intake Air Temp.». < Ref. to SUBARU SELECT MONITOR .>
- If the values from step 2) satisfy the following conditions, idle the engine for one minute.
Condition:
|Engine coolant temperature - Intake air temperature| ≤ 5°C (9°F)
NOTE:- If the conditions are not satisfied, turn the ignition switch to OFF and wait until the parameters are satisfied.
- For CVT models, hold the select lever to "P" range or "N" range at idling, and for MT models, the shift lever in the neutral position at idling.