LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) >> Transmission Harness >> Inspection

Transmission Harness: Inspection

  1. Visually check the harness and connector for damage or crack.
  2. Check the harness terminal for rust, disconnection or poor contact.
  3. Check the continuity between harness terminals and oil temperature sensor.
    NOTE: Refer to WIRING article for transmission harness terminal and oil temperature sensor terminal. <Ref. to TRANSMISSION , CVT Control System.>

    Harness continuity standard 

    Less than 1 Ω 

    Oil temperature sensor standard 

    (at 20°C) 

scientia non olet · About LEMON Manuals