Drive Cycle C
| DTC | Item | Condition |
|---|---|---|
| P0500 | Vehicle Speed Sensor "A" | - |
| P0720 | Output Speed Sensor Circuit | - |
| P0721 | Output Shaft Speed Sensor Circuit Range/Performance | - |
| P0970 | Transfer Solenoid Circuit (Low) | - |
| P0971 | Transfer Solenoid Circuit (High) | - |
| P0973 | Primary Solenoid System A Circuit (Low) | - |
| P0974 | Primary Solenoid System A Circuit (High) | - |
| P0976 | Primary Solenoid System B Circuit (Low) | - |
| P0977 | Primary Solenoid System B Circuit (High) | - |
| P1706 | AT Vehicle Speed Sensor Circuit Malfunction (Rear Wheel) | - |
| P170B | Output Speed Sensor Circuit Range/Performance Rear | - |
| P2746 | Primary Pulley Revolution Speed Sensor Circuit | - |
| P2747 | Intermediate Shaft Speed Sensor "B" Circuit No Signal | - |
| P2750 | Sec. Pulley Revolution Speed Sensor Circuit | - |
| P2751 | Intermediate Shaft Speed Sensor "C" Circuit No Signal | - |
| P2763 | Lock-Up Duty Solenoid Circuit (High) | Perform the drive cycle A, then perform the drive cycle C. |
| P2764 | Lock-Up Duty Solenoid Circuit (Low) | - |
| P2769 | Lock-Up On/Off Solenoid Circuit (Low) | - |
| P2770 | Lock-Up On/Off Solenoid Circuit (High) | - |
Diagnostic procedure:
- Start the engine.
- Accelerate slowly to a legal speed, and then decelerate slowly to a stop.