LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Vehicle Dynamics Control (VDC) System (Service Information)) >> VDC Sequence Control >> Operation >> VDC Sequence Control With SUBARU Select Monitor

VDC Sequence Control With SUBARU Select Monitor

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: In the event of any trouble, sequence control will not operate.
  1. Connect the Subaru Select Monitor to data link connector.
    1. Run the "PC application for Subaru Select Monitor".
    2. On «Main Menu» display, select «Each System Check».
    3. On «System Selection Menu» display, select «Brake Control System».
    4. When «ABS/VDC System» is displayed, select the [OK] button.
    5. Select the «Function Check Sequence» from «Work Support», and select «VDC Function Check Mode» when it appears.
  2. Operate according to the procedures displayed in the Subaru Select Monitor.
  3. The brake system being operated is displayed on the Subaru Select Monitor.
scientia non olet · About LEMON Manuals