LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Auto Headlight Beam Leveler System (Diagnostics)) >> Inspection Mode >> Procedure

Inspection Mode: Procedure

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to ON.
  2. Turn on the headlight low beam.
  3. Check that the beam axes move when the vehicle condition is kept for three seconds or more after the vehicle posture is changed with the vehicle stopped.
  4. Read the DTC and check that the DTC is not displayed. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . >
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.
scientia non olet · About LEMON Manuals