LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Lighting System (Service Information)) >> High-mounted Stop Light >> Removal >> Sedan Model

Sedan Model

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the trim panel assembly - rear shelf. < Ref. to REMOVAL , Rear Shelf Trim. >
  3. Remove the light assembly - high-mounted.
    1. Disconnect the connector.
    2. Remove the lock washers and remove the high-mounted stop light.
      Fig 1: Locating High-Mounted Stop Light Lock Washers
      G10277252Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals