Reduction Driven Gear: Installation
- Install the straight pin to reduction driven gear assembly.
Courtesy of SUBARU OF AMERICA, INC.
- Fit the straight pin portion to the recess portion of transmission case and install the reduction driven gear and install the snap ring.
Courtesy of SUBARU OF AMERICA, INC.
- Select the snap ring. <Ref. to
ADJUSTMENT , Reduction Driven Gear.>
- Replace with the selected snap ring.
NOTE:
If the clearance measured in step 3 is within standard, the snap ring replacement is not necessary.
- Install the forward clutch assembly. <Ref. to
INSTALLATION , Forward Clutch Assembly.>
- Install the intermediate case. <Ref. to
INSTALLATION , Intermediate Case.>
- Install the transfer reduction driven gear assembly. <Ref. to
INSTALLATION , Transfer Reduction Driven Gear.>
- Install the center differential carrier. <Ref. to
INSTALLATION , Center Differential Carrier.>
- Install the transfer clutch assembly. <Ref. to
INSTALLATION , Transfer Clutch.>
- Install the rear drive shaft. <Ref. to
INSTALLATION , Rear Drive Shaft.>
- Install the extension case. <Ref. to
INSTALLATION , Extension Case.>
- Install the transmission to vehicle. <Ref. to
INSTALLATION , Automatic Transmission Assembly.>