Diagnostic Method
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
Judgment Value
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| Target primary pulley shaft speed - Measured primary pulley shaft speed | ≥ 600 rpm |
| (Duty of shift up pressure control solenoid valve | ≥ 90% |
| or Duty of shift down pressure control solenoid valve) |
≥ 90% |
Time Needed for Diagnosis: 5 seconds
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.