Satellite Safing Sensor: Installation

Install the satellite safing sensor.
CAUTION:
- Do not reuse the bolt and nut.
  Always replace with the specified new bolts and nuts.
- When installing the cover - satellite safing, push the cover securely until it contacts the floor panel.
- If the cover - satellite safing is too loose at its mounting portion to remove easily, replace with a new cover - satellite safing.
- After installing the cover - satellite safing, make sure that the sensor harness does not get caught.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Install the rear seat cushion assembly.
Connect the battery ground terminal. <Ref. to BATTERY , NOTE, Note.>
NOTE: For models other than STI model, connect the ground terminal to battery sensor.