LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> DISPLAY TRANSMITTER IDs

DISPLAY TRANSMITTER IDs

NOTE: In the following procedure, the Subaru Select Monitor must be used.
  1. Connect Subaru Select Monitor.
  2. On "MAIN MENU" screen, select "EACH SYSTEM CHECK" and press YES (or OK) key.
  3. On "SYSTEM SELECTION MENU" screen, select "TIRE PRESSURE MONITORING" and press YES (or OK) key.
  4. Press YES (or OK) key after "TIRE PRESSURE MONITORING" is displayed.
  5. On "TIRE PRESSURE MONITOR DIAGNOSIS" display screen, select "TRANSMITTER ID REGIST CONFIRM" and press YES (or OK) key.
  6. Select "TRANSMITTER ID DATA MONITOR", and press YES (or OK) key to display transmitter IDs.
scientia non olet · About LEMON Manuals