LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Fuel Injection System (STI)) >> Pulsation Damper Assembly >> Removal

Pulsation Damper Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
WARNING: Place "NO OPEN FLAMES" signs near the working area.
CAUTION:
  • Be careful not to spill fuel.
  • Catch the fuel from hoses using a container or cloth.
  1. Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel.>
  2. Disconnect the fuel delivery hose (A) and fuel hose (B) from the pulsation damper assembly, and remove the pulsation damper assembly.
Fig 1: Locating Pulsation Damper
G10264967Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals