LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Fuel Injection System (STI)) >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
  2. Remove the bolt which secures crankshaft position sensor to oil pump.
    Fig 1: Locating Crankshaft Position Sensor Bolt
    G08538738Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the crankshaft position sensor, and disconnect the connector from the crankshaft position sensor.
Fig 2: Locating Crankshaft Position Sensor Connector
G08538739Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals