LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Speed Control System (STI)) >> Accelerator Pedal >> Inspection >> Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)

Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch to ON. (engine OFF)
  2. Read the accelerator pedal opening angle signal and voltage of accelerator pedal sensor using Subaru Select Monitor. <Ref. to DISPLAY CURRENT ENGINE DATA (NORMAL MODE) , OPERATION, Subaru Select Monitor.>
Accelerator pedal sensor Accelerator pedal opening angle signal Standard
Main 0.0% 0.4 - 1.0 V
100.0% 2.4 - 3.7 V
Sub 0.0% 0.3 - 1.1 V
100.0% 2.3 - 3.8 V
scientia non olet · About LEMON Manuals