Inspection Mode 7
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Item | Note |
|---|---|---|
| B1401 | M Collation NG | Model without keyless access with push button start system/model without immobilizer control module |
| B1402 | Immobilizer Key Collation NG | Model without keyless access with push button start system/model without immobilizer control module |
| B1407 | M Communication Abnormal | Model without keyless access with push button start system/model without immobilizer control module |
| B1408 | Meter EEPROM Abnormal | Model without keyless access with push button start system/model without immobilizer control module |
| B1410 | Transponder Communication Abnormal | Model without keyless access with push button start system/model without immobilizer control module |
| B1411 | Immobilizer Antenna Abnormal | - |
| U0073 | Control Module Communication Bus Off | - |
| U0074 | Control Module Communication Bus "Body-CAN" Off | - |
| U0100 | Lost Communication With ECM/PCM "A" | - |
| U0122 | Lost Communication With Vehicle Dynamics Control Module | - |
| U0128 | Lost Communication With Park Brake Control Module | - |
| U0131 | Lost Communication With Power Steering Control Module | - |
| U0151 | Lost Communication With Restraints Control Module | - |
| U0155 | Lost Communication With Instrument Panel Cluster (IPC) Control Module | - |
| U0167 | Lost Communication With Immobilizer Control Module | Model without keyless access with push button start system/model without immobilizer control module |
| U0327 | Software Incompatibility With Vehicle Security Control Module | Model with keyless access with push button start system |
| U0401 | Invalid Data Received From ECM/PCM "A" | - |
| U0416 | Invalid Data Received From Vehicle Dynamics Control Module | - |
| U0423 | Invalid Data Received From Instrument Panel Cluster Control Module | - |
| U0426 | Invalid Data Received From Immobilizer Control Module | Model without keyless access with push button start system/model without immobilizer control module |
| U0427 | Invalid Data Received From Vehicle Security Control Module | Model with keyless access with push button start system |
| U1673 | LIN Communication Bus Error Body Control Module | Depends on the customize setting |
| U0101 | Lost Communication With TCM | Depends on the customize setting |
| U0164 | Lost Communication With HVAC Control Module | Depends on the customize setting |
| U0169 | Lost Communication With Sunroof Control Module | Depends on the customize setting |
| U0208 | Lost Communication With Seat Memory | Depends on the customize setting |
| U0230 | Lost Communication With Power Rear Gate Control Module | Depends on the customize setting |
| U0402 | Invalid Data Received From TCM | Depends on the customize setting |
| U0424 | Invalid Data Received From HVAC Control Module | Depends on the customize setting |
Diagnostic procedure:
- Perform the Clear Memory Mode.
- Read the DTC and check that the DTC is not displayed.NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. After solving the DTC, repeat from step 1).
- Turn the ignition switch OFF → ON, and wait for 10 seconds or more.
- Read the DTC and check that the DTC is not displayed.NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.