Front Stabilizer: Removal

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Lift up the vehicle, and then remove the left and right front wheels.
Remove the front under cover. <Ref. to REMOVAL , Front Under Cover.>
Remove the front stabilizer.
1. Remove the left and right stabilizer links.
  
  Fig 1: Locating Left/Right Stabilizer Links
  Courtesy of SUBARU OF AMERICA, INC.
2. Remove the left and right stabilizer brackets.
  
  Fig 2: Locating Left/Right Stabilizer Brackets
  Courtesy of SUBARU OF AMERICA, INC.
3. Turn the front stabilizer by approximately 180° toward the front of the vehicle and pull out the front stabilizer from the right side of the vehicle.
  
  Fig 3: Turning Front Stabilizer
  Courtesy of SUBARU OF AMERICA, INC.