LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Fuel Injection System (H4DO)) >> Knock Sensor >> Removal

Knock Sensor: Removal

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the bolt securing the connector to the A/C compressor.
    Fig 1: Locating A/C Compressor Bolt
    G10262171Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the connector (A) from the knock sensor, and remove the knock sensor from the cylinder block.
    Fig 2: Locating Knock Sensor Connector
    G10262172Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals