LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Fuel Injection System (H4DO)) >> Engine Oil Temperature Sensor >> Removal

Engine Oil Temperature Sensor: Removal

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Disconnect the connector (A) from the engine oil temperature sensor, and remove the engine oil temperature sensor from the chain cover.
    Fig 1: Locating Engine Oil Temperature Sensor Connector
    G10262156Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals