Ignition Switch Illumination: Inspection
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTICS PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
1 CHECK IGNITION SWITCH ILLUMINATION
.
|
Does the ignition switch illumination blink? | Check the function setting of body integrated unit. <Ref. to GENERAL DIAGNOSTIC TABLE .> | Go to step 2 . |
2 CHECK IGNITION SWITCH ILLUMINATION OPERATION
.
|
When door is opened/closed, does the ignition switch illumination switch between ON ↔ OFF? | Ignition switch illumination is normal. | Go to step 3 . |
| 3 CHECK CURRENT DATA
. Using the Subaru Select Monitor, display the data of «Driver's door SW input».
NOTE:
For detailed procedures, refer to "PC application help for Subaru Select Monitor".
|
Does the display change to OFF → ON, when the door is opened/closed? | Go to step 4 . | Check the door switch circuit. <Ref. to CHECK DOOR SWITCH , INSPECTION, Keyless Entry System.> |
| 4 CHECK CURRENT DATA
. Display the data of «Key Illumination Light Output » using Subaru Select Monitor. |
Does the display change to OFF → ON, when the door is opened/closed? | CHECK THE IGNITION SWITCH ILLUMINATION CIRCUIT. <Ref. to CHECK IGNITION SWITCH ILLUMINATION , INSPECTION, Keyless Entry System.> | Check the body integrated unit and replace it if defective. <Ref. to BASIC DIAGNOSTIC PROCEDURE .> |