Clear Memory Mode: Operation

WARNING: This page is about a different car, the 2013 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

On «Main Menu» display, select {Each System Check}.
On «System Selection Menu» display, select {Brake Control System}.
When {VDC} is displayed, select the [OK] button.
On «Brake Control Diagnosis» display, select {Clear Memory}.
When «Clear Memory?» is shown on the screen, click the "YES" button.
When «Done» and «Turn Ignition Switch OFF» are shown on the screen, turn the ignition switch to OFF.

NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".