LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 278 (Engine Controls (H4DO) (Diagnostics - Introduction)) >> Drive Cycle >> Procedure >> Drive Cycle J

Drive Cycle J

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
DTC Item Condition
P2610 ECM/PCM ENGINE OFF TIMER PERFORMANCE -

Diagnostic procedure: 

  1. Idle the engine for 15 minutes or more.
  2. Turn the ignition switch to OFF.
  3. After at least 10 hours passed from the start of step  2), read the temporary code using the Subaru Select Monitor or general scan tool. < Ref. to OPERATION , Read Diagnostic Trouble Code (DTC). >