Execution Condition

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

Secondary parameters	Execution condition
Phase 1 12 V battery system voltage Engine speed	10 V or more At or more than rpm values in Table 1
Phase 2 Fail detected (P1867) 12 V battery system voltage Ignition state Measured primary pulley shaft speed Transmission fluid temperature	TRUE 10 V or more OFF 400 rpm or less 10 degC or more

TARGET LINE PRESSURE AND TRANSMISSION FLUID TEMPERATURE SPECIFICATION

		Target line pressure (kPa)
		0	500	1000	1500	2000	3000	4000	5000	6000
Transmission fluid temperature (degC)	-40	500	500	500	500	529	636	791	961	8000
	-20	500	500	500	500	529	636	791	961	8000
	0	500	500	500	500	529	636	791	961	8000
	20	500	500	500	500	529	636	791	961	8000
	40	500	500	500	500	529	636	791	961	8000
	60	500	500	506	561	631	807	1154	8000	8000
	80	500	500	590	705	818	991	1300	4658	8000
	100	500	569	670	795	901	1174	1458	4962	8000
	120	500	653	782	897	1060	1352	1707	8000	8000