LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Continuously Variable Transmission (Diagnostics)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0776: Pressure Control Solenoid "B" Performance/Stuck Off >> General Description >> Execution Condition

Execution Condition

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
Secondary parameters Execution condition
Diagnosis 1 
12 V battery system voltage
Transmission range
Measured secondary pulley shaft speed
Measured front output shaft speed
Commanded forward & reverse clutch pressure control solenoid current
Engine speed
 
10 V or more
Drive
100 rpm or more
100 rpm or more
Less than 0.9 A
400 rpm or more
Diagnosis 2 
12 V battery system voltage
Transmission range
Measured front output shaft speed
Commanded forward & reverse clutch pressure control solenoid current
Accelerator pedal position (from ECM)
Engine speed
 
10 V or more
Drive
Less than 100 rpm
Less than 0.9 A
Exceeds 6%
400 rpm or more