Execution Condition
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
| Secondary parameters | Execution condition |
|---|---|
| Diagnosis 1 12 V battery system voltage (The timer is held when the following conditions are not satisfied.) Transmission range Vehicle speed (calculated from measured secondary pulley shaft speed sensor) |
10 V or more Drive 21.7 MPH or more |
| Diagnosis 2 12 V battery system voltage Soak time (received from ECM) (Engine speed for time)
NOTE:
The monitor detects Transmission fluid temperature sensor stuck high after the elapse of 300 seconds required for Engine coolant temperature sensor diagnosis. It is necessary to avoid misdiagnosis of P0711 caused by a malfunctioning ECT sensor. |
10 V or more 21600 s or more 400 rpm or more 300 s or more |