Read Current Data: List
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
| Items to be displayed | Contents | Standard | Note |
|---|---|---|---|
| Driver's unlock touch sensor switch | Status of the touch sensor (unlock) built on the back surface of the driver's door outer handle | ON: ON when the touch sensor is touched OFF: OFF when the touch sensor is not touched |
- |
| Passenger's unlock touch sensor switch | Status of the touch sensor (unlock) built on the back surface of the passenger's door outer handle | ON: ON when the touch sensor is touched OFF: OFF when the touch sensor is not touched |
- |
| Driver's lock touch sensor SW | Status of the touch sensor (lock) built on the surface of the driver's door outer handle | ON: ON when the touch sensor is touched OFF: OFF when the touch sensor is not touched |
- |
| Passenger's lock touch sensor SW | Status of the touch sensor (unlock) built on the back surface of the passenger's door outer handle | ON: ON when the touch sensor is touched OFF: OFF when the touch sensor is not touched |
- |
| Rear Gate Request SW | Rear gate lock/unlock button status | ON: When the switch is ON OFF: When the switch is OFF |
- |
| Trunk Request SW | Trunk opener button status | ON: When the switch is ON OFF: When the switch is OFF |
- |
| Secret code Keyless registration | Secret code keyless registration status | unregistered: When not registered registered: When registered |
- |
| ECU ACC | Keyless access control module power supply voltage status | ON: When the voltage is present OFF: When the voltage is not present |
- |
| Control Module Voltage (Backup) | Keyless access control module back-up power supply voltage status | ON: When the voltage is present OFF: When the voltage is not present |
- |
| B/up | fuse Keyless access control module back-up fuse status | Connecting: When the fuse is connected Not connected: When the fuse is not connected |
- |
| Incorrect vehicle ID | ID information when performing the keyless access | No: Registered access key Yes: Unregistered access key |
- |
| No response | Access key response status | No: There is a response from the access key when the keyless access is performed Yes: There is no response from the access key when keyless access is performed |
- |
| Response code; Different format | Response status from the access key | No: Response from the access key is normal when keyless access is performed Yes: Response from the access key is different when keyless access is performed |
- |
| Battery consumption | Access key battery status | No: When the access key battery is not depleted Yes: When the access key battery is depleted |
- |
| Incorrect response code, ID code | Access key response status when performing the keyless access | No: Response from the access key is normal when keyless access is performed Yes: When response from the access key is different when the keyless access is performed |
- |
| Incorrect response code, collation result | Access key response status when performing the keyless access | No: Response from the access key is normal when keyless access is performed Yes: When response from the access key is different when the keyless access is performed |
- |
| Incorrect ID code | Access key response status when performing the keyless access | No: Response from the access key is normal when keyless access is performed Yes: When response from the access key is different when the keyless access is performed |
- |
| Incorrect rolling code | Access key response status when performing the keyless access | No: Response from the access key is normal when keyless access is performed Yes: When response from the access key is different when the keyless access is performed |
- |
| Smart Cancel | Keyless access function status | Normal: Keyless access function is activated Cancel: Keyless access function is deactivated |
- |
| Simple Smart system cancel | Keyless access function status | Normal: Keyless access function is activated Cancel: Keyless access function is deactivated |
- |
| ID Code Box W/H Connection State | Connecting status of the terminal (i241) No. 23 | Not connected: ID code box is not connected Connecting: ID code box is connected |
- |
| ID Code Box Existence Judging | ID code box connection setting | - | Normal «Existence Judging» |
| Immobilizer | Immobilizer set status | Set: When the immobilizer is set Unset: When the immobilizer is not set |
- |
| Remote engine starter communication ID confirmation | Remote control engine starter communication ID confirmation status | Collation NG: When using an unregistered remote control engine starter Collation OK: When using a registered remote control engine starter |
- |
| Remote engine starter code registration confirmation | Remote control engine starter registration status | unregistered: When the code is not registered registered: When the code is registered |
- |
| STLC sleep possible status | Steering lock control module sleep possible status | Impossible: Sleep is not possible Possible: Sleep is possible |
- |
| STLC wake-up transmission status | Steering lock control module wake-up transmission status | No transmission: Wake-up signal is not transmitted Transmission: Wake-up signal is transmitted |
- |
| Lock side sensor status | Steering lock control module status | ON: Locked status OFF: Unlocked status |
- |
| Unlock side sensor status | Steering lock control module status | ON: Locked status OFF: Unlocked status |
- |
| Lock confirmation | Steering lock control module status | Unconfirmed: When not locked Confirmed: When locked |
- |
| Unlock confirmation | Steering lock control module status | Unconfirmed: When not unlocked Confirmed: When unlocked |
- |
| Sensor initialization | Steering lock control module status | incomplete: Sensor initial operation not completed Completed: Sensor initial operation completed |
- |
| Motor protection control status | Steering lock control module status | Permitted range: Motor protection control is activated Rejected range: Motor protection control is not activated |
- |
| Motor operation prohibition voltage evaluation | Steering lock control module status | ON: Motor operation is permitted OFF: Motor operation is prohibited |
- |
| Diagnosis response | Steering lock control module status | Normal: Diagnostic communication is not in progress response: Diagnostic communication is in progress |
- |
| Sensor abnormal | Steering lock control module status | Normal: When the steering lock control module is normal Abnormal: When the steering lock control module is abnormal |
- |
| Motor power supply short-circuit abnormal | Steering lock control module status | Normal: When the steering lock control module is normal Abnormal: When the steering lock control module is abnormal |
- |
| Motor driver short-circuit abnormal | Steering lock control module status | Normal: When the steering lock control module is normal Abnormal: When the steering lock control module is abnormal |
- |
| Lock bar engagement abnormal | Steering lock bar status | Normal: Steering lock bar is normal Abnormal: Steering lock bar is stuck |
- |
| Push start abnormal | Steering lock control module status | Normal: When the steering lock control module is normal Abnormal: When the steering lock control module is abnormal |
- |
| Lock side relay operation | Steering lock control module status | Stopped: Other than in Unlock → Lock status Operating: In Unlock → Lock status |
- |
| Unlock side relay operation | Steering lock control module status | Stopped: Other than in Unlock → Lock status Operating: In Unlock → Lock status |
- |
| Motor drive FET drive | Steering lock control module status | Stopped: Not when the motor drive FET is operating Operating: When the motor drive FET is operating |
- |
| Motor reversal protection control | Steering lock control module status | Stopped: Not when the motor drive FET is operating Operating: When the motor drive FET is operating |
- |
| Engine start | Engine start permission status | Engine start permission: When the ignition switch is ON Engine start prohibition: When the ignition switch is OFF |
- |
| Sensor abnormal (past) | Steering lock control module status | Normal: When the steering lock control module is normal Abnormal: When the steering lock control module is abnormal |
- |
| Motor power supply short-circuit abnormal (past) | Steering lock control module status | Normal: When the steering lock control module is normal Abnormal: When the steering lock control module is abnormal |
- |
| Motor driver short-circuit abnormal (past) | Steering lock control module status | Normal: When the steering lock control module is normal Abnormal: When the steering lock control module is abnormal |
- |
| Steering lock lock/unlock command reception history | Steering lock control module status | OFF: - ON (keep 10 sec): When steering lock is locked → unlocked, or unlocked → locked |
- |
| Lock bar engagement abnormal (past) | Steering lock bar status | Normal: Steering lock bar is normal Abnormal: Steering lock bar has been stuck |
- |
| Push start abnormal (past) | Steering lock control module status | Normal: When the steering lock control module is normal Abnormal: When the steering lock control module is abnormal |
- |
| STLC Abnormal EEPROM access | Steering lock control module status | Normal: When the steering lock control module is normal Abnormal: When the steering lock control module is abnormal |
- |
| ID code BOX sleep possible status | ID code box status | Impossible: Sleep is not possible Possible: Sleep is possible |
- |
| ID code BOX wake-up transmission status | ID code box status | No transmission: Wake-up signal is not transmitted Transmission: Wake-up signal is transmitted |
- |
| ID code BOX Abnormal EEPROM access (now) | ID code box status | Normal: When the ID code box is normal Abnormal: When the ID code box is abnormal |
- |
| EGI code reception status | Engine start operation status | Reception: When the engine start operation is performed Not yet received: When the engine start operation is not performed |
- |
| Engine start permission request reception status | Engine start permission request reception status | Reception: Ignition ON Not yet received: Ignition OFF |
- |
| Code collation result between smart ECM and ID code box | Check result of collation code between keyless access control module and ID code box | Normal: When the engine start is possible Abnormal: When the engine start is not possible |
- |
| Code collation result between steering locked ECM and ID code box | Check result of collation code between steering lock control module and ID code box | Normal: When the steering lock operation is possible Abnormal: When the steering lock operation is not possible |
- |
| Steering lock unlock request reception status | Steering lock control module unlock request reception status | Reception (keep 10 sec): When the steering lock unlock operation is performed Not yet received: - |
- |
| Steering lock request reception status | Steering lock control module lock request reception status | Reception (keep 10 sec): When the steering lock operation is performed Not yet received: - |
- |
| Driver's external transmitter output circuit abnormal | Transmitter output circuit status | Normal: When the transmitter output circuit is normal Abnormal: When the transmitter output circuit is abnormal |
- |
| Passenger's external transmitter output circuit abnormal | Transmitter output circuit status | Normal: When the transmitter output circuit is normal Abnormal: When the transmitter output circuit is abnormal |
- |
| Driver's external transmitter output circuit abnormal (past) | Transmitter output circuit status | Normal: When the transmitter output circuit is normal Abnormal: There was a transmitter output error in the past |
- |
| Passenger's external transmitter output circuit abnormal (past) | Transmitter output circuit status | Normal: When the transmitter output circuit is normal Abnormal: There was a transmitter output error in the past |
- |
| ID code registration mode status | Immobilizer registration status | Normal: Not while registering/deleting Regist.: While registering Deletion: While deleting |
- |
| Smart related ECM code registration mode status | Immobilizer registration status | Normal: When not in the smart related ECM code registration mode On mode: When in the smart related ECM code registration mode |
- |
| ID code collation completion confirmation | Immobilizer registration status | Normal: Not when the ID code collation is complete Completed: When the ID code collation is complete |
- |
| ID code registration completion confirmation | Immobilizer registration status | Normal: Not when the ID code registration is complete Completed: When the ID code registration is complete |
- |
| Smart related ECM code registration completion confirmation | Immobilizer registration status | Normal: Not when the smart related ECM code registration is complete Completed: When the smart related ECM code registration is complete |
- |
| Registered smart key confirmation status | Immobilizer registration status | Normal: Not while confirming the registered access keys Confirming: While confirming the registered access keys |
- |
| Smart related ECM code confirmation status | Immobilizer registration status | Normal: Not while confirming the smart related ECM code Confirming: While confirming the smart related ECM code |
- |
| ID code registration status | Immobilizer registration status | Normal: Not during the ID code registration Confirming: During the ID code registration |
- |
| ID code collation status | Immobilizer registration status | Normal: Not during the ID code registration Collating the immobilizer: During the ID code collation (immobilizer collation) Collating the smart: During the ID code collation (smart collation) |
- |
| All registered keys confirmation status | Immobilizer registration status | Normal: Not while confirming all registered keys Confirming: While confirming all registered keys |
- |
| Confirmed number of all registered keys | Immobilizer registration status | Display range: 0 - 7 | - |
| Number of required registrations (smart) | Immobilizer registration status | Display range: 0 - 7 | - |
| Number of collation completed (smart) | Immobilizer registration status | Display range: 0 - 7 | - |
| Number of registration completed (smart) | Number of recognized keyless access control module | Display range: 0 - 7 | - |
| ID Code Box | ID code box connection status | Not connected: ID code box is not connected Connecting: ID code box is connected |
- |
| Steer Lock ECM | Steering lock control module connection status | Not connected: The steering lock control module is not connected Connecting: The steering lock control module is connected |
- |
| Driver's lock request SW/touch sensor switch ON edge record | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
When confirming the data on the left, confirm after performing Keyless access system check. < Ref. to KEYLESS ACCESS SYSTEM CHECK . > |
| Passenger's unlock request SW/touch sensor switch ON edge record | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
|
| Rear gate lock request SW ON edge history | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
|
| Driver's unlock touch sensor switch ON edge record | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
|
| Passenger's unlock touch sensor switch ON edge record | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
|
| Trunk unlock request SW ON edge history | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
|
| Collation OK result history (driver's external transmitter + interior tuner) | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
|
| Collation OK result history (passenger's external transmitter + interior tuner) | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
|
| Collation OK result history (front interior transmitter + interior tuner) | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
|
| Collation OK result history (rear interior transmitter + interior tuner) | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
|
| Collation OK result history (trunk internal transmitter + interior tuner) | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
|
| Collation OK result history (trunk external transmitter + interior tuner) | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
|
| Collation OK result history (rear gate internal transmitter + interior tuner) | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
|
| Collation OK result history (rear gate external transmitter + interior tuner) | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
|
| Collation OK result history (immobilizer amplifier + immobilizer amplifier) | Collation history is displayed | OFF: When the collation has never been completed before ON: When the collation has succeeded at least once in the past |
|
| Push start SW 1 | Push start SW 1 status | ON: When the push start SW is pressed OFF: When the push start SW is not pressed |
- |
| Push start SW 2 | Push start SW 2 status | ON: When the push start SW is pressed OFF: When the push start SW is not pressed |
- |
| Stop Light Switch | Brake pedal SW status | ON: When the brake pedal is depressed OFF: When the brake pedal is not depressed |
Except for MT model |
| Steering unlock SW | Steering lock control module status | ON: When the steering lock is unlocked OFF: Not when the steering lock is unlocked |
- |
| Shift P signal (AT only) | Shift (P) status | ON: When the shift position is "P" OFF: When the shift position is other than "P" |
- |
| Neutral SW/Clutch SW | Shift (N, P) status | ON: When the shift position is "P" or "N" (except for MT models), or when the clutch pedal is depressed (MT models) OFF: When the shift position is other than "P" or "N" (except for MT models), or when the clutch pedal is not depressed (MT models) |
- |
| Shift N signal (AT only) | Shift (N) status | ON: When the shift position is "N" OFF: When the shift position is other than "N" |
- |
| Delivery mode signal (AT only) | Delivery mode status | ON: When in delivery mode OFF: When in other than the delivery mode |
- |
| ACC relay monitor | Drive status of ACC relay | ON: While the accessory relay drive is output OFF: While the accessory relay drive stops |
- |
| IGN latch monitor | IGN latch status | ON: While the IGN latch signal is output OFF: While the IGN latch signal stops |
- |
| STSW signal monitor | Engine start permission signal output status | ON: When pressing the push button ignition switch while depressing the brake pedal (except for MT model) or the clutch pedal (MT model) OFF: Other than the above |
- |
| IGN1/2 relay monitor (drive output) | Drive output monitoring status of IG relay | ON: While the IG relay 1/2 drive is output OFF: While the IG relay stops |
- |
| IGN1/2 relay monitor (coil voltage) | Coil voltage monitoring status of IG relay | ON: While the IG relay 1/2 drive is output OFF: While the IG relay stops |
- |
| ACCR signal | Accessory cut relay drive status | ON: While the accessory cut relay drive is output OFF: While the accessory cut relay drive stops |
- |
| Vehicle Speed Signal | Driving status | Stopped status: While the vehicle stops Drive status: While the vehicle is driving |
- |
| Engine Speed | Condition of the engine | Stopped: While the engine stops Rotating: While the engine is rotating |
- |
| Vehicle identification | Vehicle recognition status | GAS MT: Equipped vehicle is displayed. GAS AT: Equipped vehicle is displayed. HEV AT: Equipped vehicle is displayed. Auto Start Stop MT: Equipped vehicle is displayed. Auto Start Stop AT: Equipped vehicle is displayed. |
- |
| Power Supply Condition | Power supply status | All OFF status: IG 1 relay, IG 2 relay, and ACC relay is all OFF ACC relay ON status: Accessory is ON IGN relay ON status: Ignition is ON STSW Condition: The push button ignition switch is pressed while the brake pedal (except for MT model) or the clutch pedal (MT model) is depressed |
- |
| Start SW trouble | Start SW mismatch | No: Start SW is normal Yes: Start SW is faulty |
- |
| P signal mismatch | Shift P signal error | No: Shift P signal is normal Yes: Shift P signal is abnormal |
- |
| Steering lock unlock waiting time out | Detecting status of the steering lock unlock waiting time out | No: Steering lock unlock time out has not occurred Yes: Steering lock unlock time out occurred |
- |
| Key collation waiting time out | Detecting status of the key collation waiting time out | No: Key collation time out has not occurred Yes: Key collation time out occurred |
- |
| IGN1/2 external circuit abnormal | IGN relay output status | No: IGN 1/2 external circuit is normal Yes: IGN 1/2 external circuit is faulty |
- |