LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Continuously Variable Transaxle (CVT) (H4DO)) >> Secondary Pressure Sensor >> Inspection

Secondary Pressure Sensor: Inspection

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start and warm up the engine.
  2. Depress the brake pedal, and shift the select lever to "D" range.
  3. Shift the select lever to "P" or "N" range.
  4. Depress the brake pedal and hold it.
  5. Check "secondary pressure sensor voltage" by using Subaru Select Monitor while the engine is idling. < Ref. to OPERATION , Subaru Select Monitor. >

    Specification: 

    Approx. 0.8 V 

  6. Check "secondary pressure sensor voltage" with engine stopped and ignition switch turned on by using Subaru Select Monitor. < Ref. to OPERATION , Subaru Select Monitor. >

    Specification: 

    Approx. 0.5 V 

scientia non olet · About LEMON Manuals