LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Continuously Variable Transaxle (CVT) (H4DO)) >> Primary Speed Sensor >> Removal

Primary Speed Sensor: Removal

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.
  1. Remove the transmission assembly. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Remove the primary speed sensor.
    Fig 1: Locating Primary Speed Sensor Bolt
    G08317803Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the harness connector from primary speed sensor.
    Fig 2: Identifying Primary Speed Sensor Harness Connector
    G08317804Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals