Differential Case Assembly

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Remove the taper roller bearing using the ST.
ST1 498077000 REMOVER

ST2 899864100 REMOVER

ST3 398497701 SEAT

Fig 1: Removing Taper Roller Bearing Using ST
Courtesy of SUBARU OF AMERICA, INC.
Remove the hypoid driven gear mounting bolt using the ST.
ST 18270KA020 SOCKET (E20)

Fig 2: Identifying Hypoid Driven Gear Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the differential case (LH).

Fig 3: Identifying Differential Case (LH)
Courtesy of SUBARU OF AMERICA, INC.
Remove the differential bevel gear and washer.

Fig 4: Identifying Differential Bevel Gear And Washer
Courtesy of SUBARU OF AMERICA, INC.
Remove the straight pin.

Fig 5: Locating Straight Pin
Courtesy of SUBARU OF AMERICA, INC.
Remove the pinion shaft, then remove the differential bevel gear, washer and differential bevel pinion.

Fig 6: Identifying Pinion Shaft, Differential Bevel Gear, Washer And Differential Bevel Pinion
Courtesy of SUBARU OF AMERICA, INC.