Outback Model

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: If the hook - rear seat is disconnected from the vehicle body, make sure to replace the hook - rear seat with a new part to prevent the decline of the fixed force of the seat.

Fig 1: Identifying Hook - Rear Seat

Courtesy of SUBARU OF AMERICA, INC.

Install the backrest assembly - rear seat.
Tightening torque:

53 N.m (5.4 kgf-m, 39.1 ft-lb)
Install the backrest side pad.
Tightening torque:

53 N.m (5.4 kgf-m, 39.1 ft-lb)
Install the rear seat cushion.
Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >