Power Rear Gate Inner Switch: Inspection
WARNING: This page is about a different car, the 2016 Subaru Outback, 2016 Subaru Legacy, 2015 Subaru Outback, and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the resistance between connector terminals.
Preparation tool:
Circuit tester
Courtesy of SUBARU OF AMERICA, INC.
| Terminal No. |
Inspection conditions |
Standard |
| 1 - 2 |
Switch OFF |
1 MΩ or more |
| Switch ON |
Less than 1 Ω |
- Replace the power rear gate inner switch, if the inspection result is not within the standard value.