LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (Fuel Injection System (H6DO)) >> Manifold Absolute Pressure Sensor >> Installation

Manifold Absolute Pressure Sensor: Installation

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the manifold absolute pressure sensor to the intake manifold, and connect the connector to the manifold absolute pressure sensor.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

  2. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  3. Install the collector cover.
scientia non olet · About LEMON Manuals