LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Fuel Injection System (H4DO)) >> Throttle Body >> Installation

Throttle Body: Installation

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the throttle body to the intake manifold assembly.
    NOTE: Use a new gasket.

    Tightening torque: 

    8 N.m (0.8 kgf-m, 5.9 ft-lb) 

  2. Connect the connector to the throttle position sensor.
  3. Connect the preheater hoses to the throttle body.
  4. Install the air intake boot. < Ref. to INSTALLATION , Air Intake Boot. >
  5. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  6. Fill engine coolant. < Ref. to FILLING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant. >
scientia non olet · About LEMON Manuals